OSIM uGlow Ion Care Beauty Series

Skincare tips:
• Use Cleanse program with a cotton pad, accompanied by micellar water or toners.
• Use Nourish program with your favourite serum to maximize its effects.
• Move uGlow IonCare in a circular direction when using the device.

uGlow IonCare usage instructions
Step 1:
- Lift ledge to remove cover ring.
Step 2:
- Place a thin cotton pad on massage head.
Place cover ring on top of cotton pad and secure gently to hear a 'click'.
- Cover ring should fit comfortably on massage head.
- Do not use excess force to secure cotton pad.
Note:
- Use thin cotton pad.
- Thick, fluffy cotton pad not recommended.

Tips on how to clean and store uGlow IonCare:
- Clean Massage head surface after each usage of the programs, with a soft cloth or wet tissue.
- After cleaning, wipe dry with a soft cloth.
- Store in a cool and well-ventilated area. Do not store uGlow IonCare in rooms with high temperature and humidity.

For first time usage, please charge the product for at least 8 hours using the USB cord provided. After the first charge, you will only need to charge the device for approximately 2.5 hours which would then last for at least 1.5 hours of usage.

While charging, the white ‘Power’ LED indicator will flash repeatedly
When the battery is full, the white ‘Power’ LED will remain lit
When the battery is low, the red LED indicator will start to flash repeatedly
To power on the uGlow IonCare, press and hold the power button for around 3 seconds and it will ‘beep’ once to indicate that the uGlow IonCare is turned on. Press the power button to toggle through the 3 auto programs - Cleanse, Nourish and Warmth

To adjust the intensity of each program, press the arrow button accordingly to your preference.

Hold the product such that your palms are in contact with the sensor bars located on both sides of the uGlow IonCare.

Place the massage head on your face and the uGlow IonCare will automatically be activated. Move the uGlow IonCare in circulation motions around the cheek, chin and forehead and in upwards motion around the jaw area.

Each program will last for 4 minutes. After 4 minutes, the uGlow IonCare will enter standby mode and it will ‘beep’ once.

Once it is on standby mode, the uGlow IonCare will automatically turn off after approximately 30 seconds of inactivity

To power off the device, simply press the power button again.